A High Flux Heat Exchanger for Military Avionics Part I: Design and Fabrication

R. Scott Downing; Dam C. Nguyen; Timothy J. Bland; Edward M. Flynn

doi:10.4271/941180

1994-04-01

A High Flux Heat Exchanger for Military Avionics Part I: Design and Fabrication 941180

Numerous studies have concluded that improved high power density cooling methods are required for future avionics due to the trends in increasing heat dissipation, device miniaturization and higher packaging density. A high flux heat exchanger (HFHE) has been designed to optimally meet the thermal performance and envelope requirements selected as appropriate for future avionics, at a minimum impact to the host aircraft. This paper summarizes the design and fabrication of the prototype HFHE. The HFHE has been successfully performance tested with results included in Part II of this paper.

Design objectives for the HFHE included a local heat flux capability of 100 W/cm² (at 20 one-cm² sites), a total SEM-E size module heat load of 2,000 W, and a maximum device junction temperature of 90°C with PAO coolant at not less than 0°C. An aluminum frame coldplate with a laminated copper heat transfer insert was designed and fabricated which met all of these performance requirements. The coldplate uses multiple-plate/multiple-jet impingement cooling in a stack of thin photo-etched and diffusion bonded laminations for extremely low coldplate-to-coolant thermal resistance.

SAE MOBILUS

Subscribers can view annotate, and download all of SAE's content. Learn More »

Access SAE MOBILUS »

Digital $37.00 Print $37.00

Preview Document

We also recommend:

Standards

SAE Mobilus®

Publications

News

Events

Professional Development

A World in Motion (PreK-12)

Participate with SAE

SAE Membership

Donate

A High Flux Heat Exchanger for Military Avionics Part I: Design and Fabrication 941180

SAE MOBILUS